Grand Magic Guard USB is designed for security monitor sub-system w / remote
view via IE.Input signal can up to 4 different video source. The 1st VIDEO
output to TV or LCD monitor. ( with video input ) The 2nd Video output can be
recorded by VCR. Real time displays each video in 1/4 display area at the same
time. Supports powerful PIP ( Picture in Picture ), OSD, Auto Save, Sensitivity,
Zoom, EVENT LIST, Freeze, Date, Time , Auto Sequential, Decoder Setup, Channel
Re-Name, Key Lock function.
Features:
- Plug & play USB 2.0 interface and compatible with WINME/2000/XP.
- Bundle with Digital MGuard software. ( Mpeg4 Video Database and Divx
5.0.2 Mpeg4 Codec ).
- Software Real Time MPEG4 avi video encoder and decoder.
- Display and record each camera or any video signal simultaneously.
- Support NTSC or PAL video system.
- Adjustable color setting ( Brightness, Contrast, Hue, Saturation )
quality, alarm, motion detection area.
- Motion Detection: watch for movement detected and record the video
clips.
- Preview window size adjustable ( zoom ).
- Allow the users to define the environment that they do not wish to
observe, by adjusting mask area and sensitivity.
- Mpeg4 video file database management, delete, backup or review.
- Storage recycle: When running out of disk space, the oldest file will be
deleted automatically.
Mpeg4 codec feature:
- Automatically generate Divx mp4-avi file according to your system time.
- The real-time software encoder can directly record 4 Video sources to
HD.
- Every camera Compression: 5~6Gbytes/24hr ( All frames are recorded ).
- Every camera Compression: 0.5G~3Gbytes/24hr ( with motion and time
interval ).
- Frame resolution: NTSC 320*240,PAL 360*288.
- Every camera recording frame rates: Pentium4 1G:6~8 fps?Pentium4 2G:8~12
fps.?Pentium4 2.8G:12~14 fps.
- Every camera preview frame rates: Pentium4 1G:15~20 fps.?Pentium4
2G:20~25 fps.?Pentium4 2.8G:25~30 fps.
- OS requirements: WINME/2000/XP.
- HD requirements: about 80GB for one week ( All video frames are recorded
).
- System RAM: 128 MB or above.
Hardware:
- Switchable NTSC/PAL video system.
- Support 2 Composite VIDEO out to TV or recording by VCR or Digital
MGuard software ( by USB 2.0 ).
- Support GPIO function:4 input and 1 output.
- Support 4 independent composite video input connectors.
- Can be applied to TV monitor security individually security system.
- Video 1~4 buttons are used to display single channel video and set
main-channel for PIP mode.
- Real time display each video on 1/4 display area at the same time.
- Provides horizontal image mirroring.
- Date, Time & Channel Name show status of each Quad display
- Date, Time can be selected to be displayed ON or OFF the screen.
