This Camera has been Discontinued by the manufacturer

IK-528A Toshiba Black and White CCTV Camera with 400 Lines of Horizontal Resolution

Because the CCTV industry is rapidly moving towards a digital format, Toshiba built the IK-528A to be optimized for digital recording. At 50dB, the camera's signal-to-noise ratio is considerably higher than standard cameras and assures image quality will not be jeopardized during digital video compression such as JPEG or MPEG.

Designed for value and performance, the IK-528A integrate the key features that set the standard for industry.

IK-528A Toshiba Black and White CCTV Camera A&E Specifications

The camera shall be a solid state black and white video camera. The pick-up device shall be a 1/3" interline transfer charge coupled device (CCD) with equal to or greater than 250,000 picture elements. Video output shall be provided through a BNC-type connector. Composite video output shall be 1.0V p-p with 75 Ohm impedance and shall be EIA RS-170 standard black & white video signal format. The camera shall accept CS-type lenses and be capable of supporting auto-iris type lenses (video-type & DC type). Back-focus adjustment shall be provided via a back-focus which will not require tools for adjustment. A Phillip-type set srew will lock the back-focus ring in place after adjustment.

The camera shall have an internal isolation transformer.

The dimensions of the camera shall be 2.46"(W) X 1.97"(H) X 4.45"(D). Camera mounting shall be performed via a 1/4" X 20 threaded hole in the camera casing. The camera shall be capable of being mounted either from the top or bottom. Camera weight shall not exceed 21.2oz. Ambient operating temperature shall +14 degrees to +122 degrees Fahrenheit. Ambient operating humidity shall be 30% to 90%.

Camera resolution shall be a minimum of 400 TV lines horizontal and 350 TV lines vertical. Synchronization shall be achieved via line-lock 24 volts AC 60Hz. There shall be provisions for vertical phase adjustment. Signal-to-noise ratio shall be 50dB. AGC shall be automatic and provide a minimum 18dB gain. The sensitivity of the camera shall render a minimum subject illumination of 0.032 Lux (F1.2). The camera shall have auto electronic shutter capable of 1/100,000 second. The camera shall also have provision for 4-zone user programmable back light compensation. The camera shall have provision to boost dynamic range by approx. 30%, selectable by user.

Camera shall be powered by a 24 VAC, 50/60Hz power source. Power consumption shall not exceed 5.5 W. The camera shall be UL and CUL approved.

Features: IK-528A

• Four position programmable back-light compensation
• Dynamic Range Boost (User programmed)
• 0.032 Lux minimum illumination at F1.2
• 400 Lines Horizontal Resolution
• EZ back-Focus adjustment
• High speed auto-electronic shutter 1/60 ­ 1/100,000 of a second
• Smaller & more compact size
• 24VAC Line-lock
   

Specifications: IK-528A