Network Video Technologies NV-216A-PV Video Transceiver with Power is a passive non-amplified device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair UTP telephone wire. Baseband composite signals of any type are supported. The NVT Model NV-216A-PV video transceiver allows transmission of CCTV video and low voltage power over UTP cable. The NV-216A-PV incorporates the transceiver engine of NVT’s popular NV-213A video transceiver with the added value of camera power connections. Power and Video are routed via UTP and RJ45 connections. Used at the camera, the passive NV-216A-PV has a compact body, a male BNC for direct connection to the camera, and is compatible with NVT’s PVDTM product line. Connect the RJ45 to 4-pair cable to be routed to the NVT cable integrator and on to an active or passive receiver hub in the MDF/Control Room. The unparalleled interference rejection and low emissions of the NV-216A-PV allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. As with all NVT products, the NV-216A-PV carries a limited lifetime warranty and is UL and cUL listed.