Network Video Technologies NV-218A-PVD Video Transceiver with Power and Data is a passive non-amplified device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair UTP telephone wire. Baseband composite signals of any type are supported. This new product incorporates the transceiver engine of NVT's popular NV–213A video transceiver with the added value of Power and Data connections to and from the camera. Power, Video and Data are routed via UTP and RJ45 or press-fit terminal block inputs/outputs. Used at the camera, the passive NV-218A-PVD has a 9 mini-coax pigtail lead for direct video output connection from the camera. Along side this coax lead are two sets of press-fit terminal blocks for quick pass through connections for your camera's Power and Data. On the house or output side of the product you have the option of using convenient press-fit UTP connectors or the more efficient RJ45. The unparalleled interference rejection and low emissions of the NV–218A–PVD allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. As with all NVT products, the NV–214A carries a limited lifetime warranty and is UL and cUL listed.