Panasonic BB-HCM371A Network Camera Outdoor ready
Main Features: BB-HCM371A
Splash Resistant body for indoor and outdoor use
Your Panasonic Network Camera has a splash resistant body. The splash resistant
body allows the camera to be used indoors or outdoors.
Wireless Communication
Network Camera corresponds to the wireless system based on IEEE 802.11b/g.
Wireless installation will play an increasing role in flexible mounting.
Communication via Ethernet® cable is also available. Encryption establishes the
security on the wireless network.
IPv6*2 Network Camera
Your Panasonic Network Camera supports IPv6 (Internet Protocol Version 6), IPv6
was created to address the additional IP addresses that will be needed as the
Internet continues to expand. Since the camera also supports IPv4 that's
currently used, it is "dual stack" design will seamlessly operate while IPv6 is
phased in. For more information in IPv6 you wish to visit http://www.ipv6.org/.
Audio 2-way Communication*3 (Walkie-talkie Type)
Your Panasonic Network Camera now provides 2-way audio, between the
camera and your PC. You will be able to hear the person on camera and respond
using a microphone connected to your PC's sound card (customer-provided.) They
will hear your response through the amplified speaker (customer-provided)
connected to the camera.
For example, the camera can be used in the following various
locations
- In the baby's room, to hear if the baby is crying.
- At the front door, to see and hear who is at the door.
- In the children's play room, to see and hear if they are safe.
Note:
PLEASE NOTE that under certain circumstances, audio/video recording may be
PROHIBITED by law. This device should be used only in compliance with all
applicable federal, state and local statutes.
Better Image Quality
The CCD sensor and the color night view mode provides better image quality and
low light performance.
- The CCD sensor gives you clear image.
- You can monitor live video (Motion JPEG) that refreshes its image 30
frames per second.
- Color night view mode allows you to monitor the camera in low
illuminance.
Various Camera Control Features
The camera pans or tilts fast in maximum 80 ° per second. (The previous model:
21 ° per second) You can control the camera at high speed from your PC or cell
phone. Alarm position feature also allows the camera to automatically turn the
lens to the alarm position. Additionally, the following control features are
available to easily and quickly monitor the camera.
SD Memory Card*1 Recording
The camera has an SD memory card slot. You can record camera images to the SD
memory card. If you enable alarm buffer/transfer, you can record the image at
the timing of signal detection of door sensor or light. About 58,000 images (320
x 240 resolution and standard quality) can be recorded to 1 GB SD memory card.
If you enable 1-minute interval timer buffer/transfer, you can record the images
for about 41 days.
Enhanced Multi-Camera Page
Multi-Camera page displays up to 4 cameras while supporting each audio 2-way
communication. The previous model displays only 4 cameras, but this camera can
switch 3 sets of 4 cameras. Additionally, the camera can displays maximum 12
cameras on a page in a static image.
Supporting Viewnetcam.com service Viewnetcam.com service allows
you to access the camera over the Internet with your favorite domain name (e.g.
bob.viewnetcam.com) instead of a global IP address.
Multi-Language Display
Top page, Single Camera and Multi-Camera page can be displayed inEnglish,
French, German, Italian, Spanish, Russian, Simplified Chinese or Japanese. The
Setup, Maintenance and Support pages are displayed only in English or Japanese.
For more information please visit Manufacturers web page
