Vicon Indoor V3030APT Pan Tilt Drive

MODEL: V3030APT AND V3030APT-SB
PRODUCT CODE: 0123 AND 0124

DESCRIPTION: LIGHT-DUTY PAN-AND-TILT DRIVES WITH AUTOPAN

• Two mounting options
• Built-in connector for motorized lenses
• Concealed wiring
• 7.5 lb (3.4 kg) load rating

The V3030APT and V3030APT-SB Pan-and-Tilt Drives are light-duty indoor units designed specifically for use with CCD cameras. Both offer autopan operation. All wiring to the camera and lens is concealed within the pan-and-tilt for an uncluttered appearance. Both units are capable of handling loads up to 7.5 pounds (3.4 kg) and have user-adjustable pan-limit stops. The unit is constructed almost entirely of high-strength plastic. A built-in connector is provided for motorized lens cable connections.

The V3030APT is designed with a 10-inch (25 cm) integral wall mount styled to complement the pan-and-tilt. The wiring to the pan-and-tilt, camera, and lens is routed through the wall mount and into the wall, eliminating any free cables and providing a clean, uncluttered look.

The V3030APT-SB is equipped with a square mounting base for installations not requiring the use of the integral wall mount. It may also be used in inverted installations.

The V3030APT and V3030APT-SB are UL listed under UL standard 2044.

ASSOCIATED EQUIPMENT AND ACCESSORIES

Model V181RM-1 Relay Box: For use with 24-VAC panand- tilts. Allows cable runs up to 15,000 ft (4,600 m) using No. 18 AWG wire. Use with 24-VAC output controls. (Refer to Table 1 for maximum operating distances.) Product Specification 133