Kramer Electronics WP-230 WP-230 is a wall plate line driver for computer graphics video signals with resolutions from VGA through UXGA and higher, composite video, s-Video (Y/C) signals and stereo audio signals. It provides controls to compensate for signal losses inherent in long cable runs. High Bandwidth - 520MHz (-3dB) for 15-pin HD, 438MHz (-3dB) for composite video and 155MHz (-3dB) for Y/C. HDTV Compatible. Front Panel Connections - 15-pin HD (PC) with 3.5mm stereo Audio and RCA for composite video and 4-pin for Y/C with 2 RCAs for stereo Audio inputs. RJ-45 (Pass-through). Rear Panel Connections - 5 BNCs for the computer graphics signals, terminal blocks for the composite video and Y/C signals, and balanced stereo terminal blocks for each stereo audio signal. RJ-45 (pass-through). Level (Gain) Control - Line level Audio from 2 RCAs, composite video and s-Video (both Y and C). EQ (Peaking) Control - 15-pin HD and composite video. Audio Level Controls - Left and Right for stereo Audio on 2 RCAs. Wall Plate Size - Single gang.